Revision # 1.50   Modifications made on December 22, 2008

• In the Reset section, the TO & PDF Flag table was modified
  　
• In the Reset section, the STATUS and INTC entries in the register reset status table were modified.
  　
• The SIES Register table was modified.
  　
• The Application Circuits section was modified.
  　
• The Product Tape and Reel Specifications section was modified.

Revision # 1.40   Modifications made on August 22, 2008

• All related references to the HT82M9AAE were added.
  　
• At the Features section, the each endpoint was modified.
  　
• In the Features and other related sections, for the 20/24-pin SSOP package type, 209mil was changed to 150mil.
  　
• The Instruction Set section was modified.
  　
• The Instruction Definition section was modified.
  　
• At The Product Tape and Reel Specifications section, the Carrier Tape Dimensions diagram was modified.

Revision # 1.30   Modifications made on December 11, 2007

• All related references to the HT82M9AAE were removed.
• In the Features and other related sections, the package types were modified.
• In the Features section, the original USB 1.1 has now been replaced with USB 2.0.
• The D.C. Characteristics table was modified.

Revision # 1.20   Modifications made on August 13, 2007

• In the D.C. Characteristics table, the pull-high parameters for DATA and CLK were modified.
• In the Indirect Addressing Register section, the MP0 and MP1 reference as 7-bit registers was modified to 8-bit.

Revision # 1.10   Modifications made on July 19, 2007

• The HT82M9AAE has now been released, therefore any references to this device not yet being available were removed.
• In the D.C. Characteristics section, the previous operating voltage range was modified.

Revision # 1.00   This was posted on March 29, 2007