HT7A6003 -- EMI-Improved Green Mode PWM Controller with Integrated Protections

General Description

HT7A6003 is an advanced, highly integration Off-Line PWM Controller. This device provides many protection functions with ultra low power circuit design, and is the only fully UC3842 pin to pin compatible device which is optimized for restraining EMI in the world. By integrated a Non-Audible Noise Green Mode Control Scheme and optimizing for the Energy Star 2.0 spec., the Power Supply Unit (PSU) implemented using the HT7A6003 can satisfy the "Energy Star No-Load Mode" Stand-by Power standard, which is less than 0.3W within all Nameplate Output Power Range of 0~250W. This device also integrated various protection functions such as Short-Circuit Protection (SCP, which can also be used for Over-Load Protection, OLP), Cycleby-Cycle Current Limiting, Over Voltage Protection (OVP), and Soft-Start function for reducing inrush current during system initialization and preventing device burn-out.

The HT7A6003 also integrates Leading-Edge Blanking and Slope Compensation for minimizing external components cost and system complexity.

Features

  • Frequency Jitter for Restraining EMI
  • Integrated Soft-Start Function
  • Very Low Operating Current and Start-up Current (<20mA) for satisfying Energy-Star 2.0 "No-Load Mode" (Stand-by) Power standard
  • ±5% Trimmed Oscillator for Precise Frequency
  • Programmable Switching Frequency
  • Non-audible-noise Green Mode Control
  • LEB (Leading-Edge Blanking) on CS Pin
  • Internal Slope Compensation
  • Cycle-by-Cycle Current Limiting
  • Short-Circuit-Protection(SCP) for Short-Circuit and Over-Load Condition
  • Over-Voltage-Protection(OVP) on VCC Pin
  • Fully Pin-to-Pin Compatible with UC3842
  • 8-Pin SOP package

技术相关信息

其它相关信息