|
HT82J30R/HT82J30A -- 16 Channel A/D MCU & SPI
Interface
General Description
The HT82J30R/HT82J30A are 8-bit high
performance, RISC architecture microcontroller devices specifically
designed for A/D applications that interface directly to analog
signals, such as those from sensors.
The mask version HT82J30A is fully pin and
functionally compatible with the OTP version HT82J30R device.
The advantages of low power consumption, I/O
flexibility, programmable frequency divider, timer functions,
oscillator options, multi-channel A/D Converter, Pulse Width
Modulation function, Watchdog timer, SPI interfaces, Power Down and
wake-up functions, enhance the versatility of these devices to suit
a wide range of A/D application possibilities such as sensor signal
processing, motor driving, industrial control, consumer products,
subsystem controllers, etc. With the provision of dual SPI
interfaces the devices are especially suitable for Joystick Encoder
applications.
The HT82J30A is under development and will be
available soon.
|
Features
- Operating voltage:
fSYS=4MHz: 2.2V~5.5V crystal clock mode
fSYS=12MHz: 2.7V~3.7V RC clock mode
- 35 bidirectional I/O lines (max.)
- 2 interrupt inputs shared with I/O lines
- 8-bit programmable timer/event counter with overflow
interrupt and 7-stage prescaler
- On-chip crystal and RC oscillator
- Watchdog Timer
- 4096x15 program memory ROM
- 216x8 data memory RAM
- PFD function for sound generation
- HALT function and wake-up feature reduces power
consumption
- Up to 0.5us instruction cycle with 8MHz system clock
at VDD=5V
- 6-level subroutine nesting
- 16 channel 8-bit resolution A/D converter
- 1 channel (6+2)-bit PWM output shared with an I/O
line
- Bit manipulation instruction
- 15-bit table read instruction
- 63 powerful instructions
- LVR reset voltage of 3V±0.3V
- All instructions executed in one or two machine
cycles
- PB2, PB3, PD4, PD7 can be optioned as either
CMOS or NMOS outputs
- Integrated dual SPI interfaces
- 28-pin SKDIP/SOP and 44-pin QFP packages
|
|
|