|
Revision # 1.50 Modifications made on
December 7, 2007
- The Pad Assignment and Pad Coordinates section were
modified.
Revision # 1.40 Modifications made on
November 14, 2007
- In the Instruction Set Summary section, the Select
112x16 for function was modified.
Revision # 1.30 Modifications made on
April 13, 2006
- In the Features section, at the Pin Assignment and other
related locations, the 160-pin QFP package, was replaced by
a 208-pin QFP package.
Revision # 1.20 Modifications made on
November 10, 2005
- A Technical Document section was added.
- At the D.C. Characteristics table, the Max. value for
the RPH was modified.
Revision # 1.10 Modifications
made on September 17, 2004
- At the Pad
Description table, the description for pins T1-T4 were modified.
- At the D.C.
Characteristics table, the Min. and Typ. values for IOH1,
IOH2, IOH3 and IOH4 were modified.
- At the Bias Generator
section, some text contents and a Note were added. The Internal
Resistor Type Bias Generator Configuration diagrams were modified as
well.
- At the
Timing Diagrams section, the Write Mode and the Read-Modify-Write
Mode diagrams were modified.
- At the Application
Circuits section, an additional Note was added.
Revision # 1.00 This was
posted on September 16, 2003
|
