Revision # 1.60   Modifications made on June 19, 2008

• In the Features, Pin Assignment and other related sections, the HT95L100/10P 64-pin QFP package type was modified to a 64-pin LQFP package type.
  　
• The Instruction Set section was modified.
  　
• The Instruction Definition section was modified.

Revision # 1.50   Modifications made on May 27, 2005

• At the Application Circuits diagram, the DTMF resistor value was modified.

Revision # 1.40   Modifications made on February 17, 2005

• At the Electrical Characteristics table, the Typ. value of the I_SLP, I_GRN, I_NOR was added.

Revision # 1.30   Modifications made on October 6, 2004

• At the Electrical Characteristics table, the minimum value of the V_LBIN was changed from 1.10V to 1.05V and the maximum value was changed from 1.20V to 1.25V.

Revision # 1.20   Modifications made on May 26, 2004

• The Product Title was modified from 8-Bit LCD Type Phone Controller MCU to LCD Type Phone 8-Bit MCU.
• At the Absolute Maximum Ratings section, the Operating Temperature range was changed from -25^oC~70^oC to -20^oC~70^oC.
• At the Timer/Event Counter section, the labels on the diagram and the text contents were modified.

Revision # 1.11   Modifications made on December 16, 2003

• At the Instruction Set Summary and Instruction Definition sections, the missing TABRDL [m] instructions were added back.

Revision # 1.10   Modifications made on October 3, 2003

• At the Data Memory section, the LCDIO entry of the embedded control register table for HT95L200/P was indicated as none (-).

Revision # 1.00   Modifications made on August 18, 2003

• Preliminary texts were deleted from the front page heading and the subsequent pages.
• The PD flag label was changed to PDF flag.
• The Instruction Definition section was modified, with the first two columns deleted.

Revision # 0.30   Modifications made on May 14, 2003

• HT95L400/40P, HT95L100/10P and HT95L000/00P and all related sections were added.

Revision # 0.20   Modifications made on January 9, 2003

• The Dialer I/O Interrupt function was modified.
• The HDO pin of the Application circuit was added.

Revision # 0.10   Modifications made on October 1, 2002

• The Low battery detection reference voltage was modified to 1.15V.
• One of the control signals of the Control function was modified.
• From the Mask Option table, the Disable HALT function option was deleted.
• The XMUTE pin test condition was modified.
• Package Information section was added.

Revision # 0.00   Modifications made on December 11, 2001